Today, many car owners have high pressure washers. And in this review, the author suggests making a nozzle for a washing gun with your own hands, with which you can wash the floor in the garage or concrete (asphalt) coating on the street.
Also, if you change the location of the through holes in the section of the profile pipe, a homemade nozzle can be used to wash the bottom of the car.
First, the author cuts the workpiece from the profile pipe of the required length and drills four holes in it on one of the sides. On the opposite side of the profile, you will need to drill one hole in the center.
The main stages of work
Next, it will be necessary to weld four nozzles to the section of the profile. At the ends of the workpiece, the master welds square plugs from a steel plate.
After that, the author welds the adapter fitting to the hole on the opposite side - so that the nozzle can be attached to the washing gun of the car wash. Bolts must be welded to the plugs.
Next, it is necessary to clean the profile pipe from rust and dirt, then degrease and paint. After that, the author puts the wheels on the bolts.
We attach the resulting nozzle to the washing gun, and you can start cleaning. The device, although very simple, but in the household can come in handy.
Details on how to make a simple nozzle on wheels for the washing gun of a car wash can be found in the video on the website.
