Home-made mini trolley for transporting doors and sheet building materials

Pin
Send
Share
Send

It is not very convenient to carry doors, plywood sheets, drywall or large window units alone. And it’s not safe, since in this case there is a high probability of getting injured (at least you can stretch your back muscles).

If there is no partner nearby, you can use a makeshift trolley, with which it will be much more convenient and easier to move dimensional objects from place to place. You can make such a device from inexpensive available materials.

The main stages of work

For the manufacture of this homemade product you will need eight small bearings, a small piece of an I-beam, three metal plates, as well as a stud and a bar of rectangular cross section. A grinder is required for cutting blanks, and welding is required for joining.

One plate is welded to the base of the I-beam, and the remaining two are attached on the sides to form walls. Instead of an I-beam, you can take two corners that are welded together.

Mini Trolley Assembly

At the edges of the soles of the I-beams, two studs must be welded. A metal strip of rectangular cross section must be bent with the letter "G" with a tail, and then welded to the side plate. We grind and paint the resulting mini-cart case.

We put two bearings on the ends of the studs and press them with a nut. The result is a compact, lightweight and convenient mini trolley for transporting doors, window blocks, countertops or sheet materials. In a private house and in the country, such a homemade handy.

Pin
Send
Share
Send

Watch the video: BiGDUG Heavy Duty Panel Dolly Product Video (November 2024).