In the summer cottage often have to build various fences or vertical frames for hedges. However, when changing the layout of the site, there is often a need to get out of the ground once used stakes from metal pipes, fittings or corners.
Hands uproot vertical racks - it’s very troublesome, which takes a lot of time and effort. Quickly cope with this task will help a simple homemade device, which just serves to pull the stakes out of the ground.
Also, this device is useful in a campaign to quickly remove clogged tent stakes from the ground. To make such a useful tool, you will need a piece of steel corner, a section of a profile pipe of square section, a piece of a round pipe and smooth reinforcement.
Step-by-step work process
First of all, with the help of a grinder, we cut a piece of a steel corner, after which a small groove of a triangular shape will need to be cut in one of the shelves. The corner for this purpose can be used with a section of 45x45 mm or another size - at your discretion.
After that, we cut the length of the profile pipe 15x15 mm or 20x20 mm, necessary for the length, and with the help of the grinder we cut one of the walls (along the entire length of the profile). Then we take a small segment of smooth reinforcement and bend it in a vice.
At the last stage of work, we weld all the parts together, and weld a piece of a round pipe - as a result, we got a simple home-made device for pulling stakes from the ground.
The design is very simple, if desired, everyone can repeat it. In the video below, you can see the detailed manufacturing process of this device.
