Driving nails into the ceiling is not an easy task, especially if you do it with a heavy hammer. And in this case, a simple homemade nozzle for a punch is useful. You can make it from the old drill.
What is remarkable about this homemade product is that when it is used, there is no load on the perf. Maneuvers with a puncher may seem uncomfortable to someone, but in any case it is easier than trying to hit the nails with a heavy hammer.
If you have an old or broken drill somewhere lying around, you only need to cut a piece with a shank from it, and also find a nut that is suitable in size. The nut must then be welded to the drill bit.
The main stages of work
Actually, the work here is "like a cat cried." Cut off the drill, find the nut. We fix everything in a vice and weld. Then you will need to clean the weld with a grinder (or a simple emery cloth), so that everything is for feng shui.
Homemade nozzle is ready. Please note that the nut to the drill does not need to be welded flush at the end, but slightly pushed out. Inside, you should get a recess under the head of the nail.
We insert the nozzle into the puncher and you can get to work - hammer nails into the floor or ceiling. For details on how to make such a nozzle with your own hands, see the video on the site.
