The original tomahawk ax can be made with your own hands from ordinary fittings. This will require hot metal forging skills.
Such a homemade hatchet tomahawk can be used for throwing, as well as present as an original gift to a man.
The first step is to cut off a piece of reinforcement of a suitable length. The design is solid, and therefore the length of the workpiece must be measured as accurately as possible.
The main stages of work
Then you need to light a gas mini horn to heat the fittings. First you need to heat the fittings in the middle and fold the bar in half.
At the next stage, it will be necessary to give the future ax a tomahawk concrete form. This is convenient to do on a blacksmith anvil with a horn.
Then you need to scald the handle of the ax, after which you need to make a point on the butt. To perform the last operation, you will need to reheat the edge of the reinforcement in the furnace, and then work a little with a hammer.
Next, you will need to grind the workpiece, as well as sharpen the blade of the ax and the point on the butt. For this, the master uses a belt grinder and a grinder. Then the blade will need to be hardened.
At the last stage of work, it will be necessary to complete the final sharpening of the blade, and then paint the ax with black paint. And the master decided to wrap the handle with leather, so that it would be convenient to hold the ax in his hands.
For details on how to make the original tomahawk ax from rebar yourself, we recommend that you look in the video on the site.