In this review, the author shows how you can make a compact stand with a broach for angle grinders (grinders) with your own hands. Such a homemade handy in any home workshop.
The first step is to cut out two square-shaped plates and drill 3 holes in each of them. First you will need to do the markup.
Then two plates are connected to each other using bolts, and inside the author installs three bearings. A profile pipe will pass between the bearings.
The main stages of work
Then you need to cut off a piece of the corner where you need to drill three holes. It must be screwed on three bolts to the upper plate, after having previously drilled holes in it.
Further, from sections of the profile pipe and sheet metal, it will be necessary to make a platform with a rack, to which the Bulgarian will be attached. In a sheet of metal you will need to make a slot under the cutting disc.
Then it remains only to fasten the blank for the blanks to the sheet of metal and install the spring so that the lever returns to its original position.
The final touch - grinding and painting homemade. For details on how to make a stand with a broach for angle grinders with your own hands, we recommend that you look in the video on the site.
