In this review, the author shares the idea of how to make a seat for a child with a mount on a bicycle frame. More precisely, the seat is already ready, only the fastening itself will need to be done.
This will require a piece of profile pipe, two clamps, a piece of plate and pieces of metal strip. In general, the author uses everything that he found at hand.
First of all, it is necessary to cut off two identical lengths of a strip of strip and cut a square plate. All parts are welded together.
The main stages of work
At the next stage, it will be necessary to weld a piece of a profile pipe of rectangular cross section to a metal plate. Welds must be cleaned with a grinder (angle grinder).
A piece of the construction corner must be welded to the opposite end of the profile pipe. Two holes must be drilled in it so that the clamp can be screwed on.
At the other end of the profile, the author weld two plates vertically. A clamp is then welded to them. After that, it remains only to clean and paint the metal, and secure the seat.
For more information on how to make a DIY seat for a child mounted on a bicycle frame, see this video.
