In this review, the master shows the manufacturing process of a simple fixture for twisting a square bar of metal.
To make this homemade product, you will need blanks from a steel strip and a square bar, as well as a profile pipe and bolts with nuts.
The first step is to cut four pieces from a piece of metal strip.
Then the author cuts five blanks from a square bar and welds the bulk of the structure from them.
Progress
On the sides of the part obtained, it is necessary to weld two pieces of a metal strip cut off at the very beginning.
To the upper part of the part, the author welds a piece of a square with a hole for the fixing bolt. The hole will need to be threaded.
To the lower square, the author welds a piece of metal strip so that the device can be fixed in a bench vise.
The main part of the homemade product is ready. Now it remains only to make a pen. For this, the author uses a piece of a profile pipe and a plate. They need to drill holes for the bolts.
For details on how to make a device for twisting a square bar with your own hands, see the video on our website. Write comments - we are interested in knowing your opinion.
